     
Sheet Rubber
Regional Rubber Company
provides sheet rubber in a wide range of compounds including, Neoprene, EPDM, Silicone, Viton, Nitrile, Gum, SBR, Butyl and
more. We offer standard commercial grade materials, as well as,
specification grade materials to meet ASTM, FDA and Mil-Spec
requirements. Color
matching and custom compounding are also available.
Most of our standard
products are available in cut length or full rolls in standard widths of
36" and 48" wide. Certain styles are also available up to 72" wide.
We're can supply materials slit to width, punched, notched or die cut to
assist you with your application.
Call 1-800-584-2240
or e-mail your inquiry to
sales@regionalrubber.com.
|
|
|
 |
Neoprene Sheet
Neoprene is an
all purpose polymer with many desirable
characteristics. It has additional plus
features: high resilience with low compression set;
flame resistance; compounds free of sulphur are
easily made; and animal and vegetable oil resistant
generally not affected by moderate chemicals, fats
greases and many oils and solvents.
Sizes, Specifications and
Pricing
|
|
|
|
|
EPDM Sheet
Ethylene
Propylene is a polymer with outstanding properties.
It has exceptionally good weather aging and ozone
resistance; excellent water and chemical resistance;
excellent resistance to gas permeability, and
excellent resistance to aging due to exposure to
steam; and heat, resistance excellent up to 350
degrees F. Ethylene Propylene is a polymer
where oil and solvent resistance is poor, however,
it is fairly good in ketones and alcohols. It
is not recommended for food applications or exposure
to aromatic hydrocarbons.
Sizes, Specifications and
Pricing50"
x 22.43" x 21.25" cm)
|
|
|
|
|
Nitrile Sheet (Buna-N)
Nitrile
(Buna-N) is a general purpose oil resistant polymer
which has good solvent. oil, water and hydraulic
fluid resistance, good compression set, abrasion
resistance and tensile strength. Nitrile
should not be used in highly polar solvents such as
acetone, and MEK, ozone, chlorinated hydrocarbons
and nitro hydrocarbons.
Sizes, Specifications and
Pricing2.50"
x 22.4 26.50" x 26.50" x 26.50"
|
|
|
|
White Nitrile Sheet
White Nitrile sheet is made from FDA
approved ingredients per Z1 CFR 177.2600. It
also meets "3A Sanitary Standards for Multiple Use
Rubber and Rubber-like Materials used as product
contact surfaces in dailr equipment," number 18-01,
Class III ans IV. it has good resistance to
oily and greasy food products and abrasion.
This sheet is non-marking.W
Sizes, Specifications and
Pricing
x 22.4 26.50"
|
|
|
|
|
SBR Sheet
SBR is a low
cost non-oil resistant material. It has good
water resistance and resiliency up to 70 durometer;
compression set becomes poorer with higher durometer;
generally satisfactory for most moderate chemicals
and wet or dry organic acids.
SBR is not recommended for ozone, strong acids,
oils, greases, fats and most hydrocarbons.
Sizes, Specifications and
Pricing2.50"
x 22.4 26.50"
|
|
|
|
|
Fluorelastomer Sheet
(Viton®)
Viton® Fluoroelastomers have heat resistance up to 6000 degrees
F, and resistance to a wide range of oils and
solvents; especially all aliphatic, aromatic and
halogenated hydrocarbons, acids, animal and
vegetable oils.
Vi-Chem is not recommended for ketones, low
molecular weight esters and nitro containing
compounds.
Sizes, Specifications and
Pricing.50"
x 22.4 26.50" .06"x17.93"x10.43"
|
|
|
|
Silicone Sheet
Silicone
Rubber has a great many variations and can be
compounded to meet any number of applications.
Silicone can be compounded to have tensile in the
area of 1500 PSI and tear up to 200 lbs.; low
compression set and good resilience; moderate
solvent resistance; excellent heat resistance; good
release characteristics; extreme low temperature
properties; and can be highly resistant to oxidation
and ozone attack.
Silicone is generally attacked by most concentrated
solvents, oils, concentrated acids and dilute sodium
hydroxide.
Sizes, Specifications and
Pricing2.50"
x 22.4 26.50"
|
|
|
|
|
Butyl Sheet
Butyl rubber
is impermeable to most common gasses and has good
resistance to sunlight and ozone. Butyl is
normally satisfactory when exposed to animal and
vegetable oils and oxidizing chemicals.
Butyl is not recommended for use with petroleum
solvent, coal tar and aromatic hydrocarbons.
Sizes, Specifications and
Pricing22.50"
x 22.4 26.50"
(61.6 x 49.3x 22 cm)
|
|
|
|
|
Masticated Rubber
Sheet
Masticated
Rubber sheets and rolls are formulated with recycled
rubber to provide automotive and industrial
engineers with the perfect alternative to virgin
rubber. Use Masticated Rubber for a variety of
automotive applications including: fuel tank pads,
air dams, mud flaps, splash shields, and more.
Sizes, Specifications and
Pricing.50"
x 22.4 26.50"
|
|
|
|
|
Gum Rubber Sheet
Natural rubber
has many good characteristics. It has high
resilience, good compression set, food roll building
behavior, and molding properties; very good friction
surface, but not a fine smooth surface when ground;
high tear strength, low crack growth; usable for
ketones and alcohol; and good low temperature
properties.
Natural rubber is not recommended for oil and
solvent resistance and ozone attacks it.
Sizes, Specifications and
Pricing2.50"
x 22.4 26.50"
|
|
|
|
|
Latex Sheet
A 95% Pure
Natural Rubber manufactured fro fresh field latex.
Commonly used in slurry handling applications
including pipelines, chutes and tank linings,
hydro-cyclones and sumps. Latex offers high
abrasion resistance, tear resistance, impact
resistance, chemical resistance and electrical
resistance.
Sizes, Specifications and
Pricing2.50"
x 22.4 26.50"
|
|
|
|
|
Urethane Sheet
Urethanes have
excellent abrasion resistance; good compression set
at high hardness levels; low friction surface;
tensile strengths up to 6000 PSI; good ozone
resistance; good oil and solvent resistance; and
poor heat and hot water resistance
Sizes, Specifications and
Pricing
x 22.4 26.50"
|
|
|
|
|
Fluorosilicone Sheet
Fluorosilicone
is considerably more expensive than silicone,
however it is developed for special applications
where general resistance to oxidizing chemicals,
aromatic and chlorinated solvent bases is required.
Fluorosilicone is not recommended and is generally
attacked when exposed to brake fluids, hydrazine and
ketones. Fluorosilicone should not be confused
with silicone in regard to high heat resistance.
Sizes, Specifications and
Pricing
x 22.4 26.50"
|
|
|
|
